Sanitary RTD's
| General: 100 ohm, 3-wire* sensors which conform to DIN
standards. Single element standard; dual element optional Coefficient: .00385 ohms/ohm/Deg. C Accuracy: .1% at 0°C (Band 1) Standard Probe Diameters: 1/4" standard for sanitary clamp styles (1"-4") single or dual element. Other diameters available for thermowell installation |
Response: 2.5 to 3 seconds for 63% step change Span: 400°F (221°C) maximum Low End: -50°F (-45°C) minimum High End: 350°F (176°C) maximum Material: 316 "L" Stainless Steel wettable parts Surface Finish: 25 micro-inch Ra 32 micro-inch Ra (thermowell fittings) Fitting Styles: All standard sanitary clamp styles, including fractional clamps and mini thermowell styles; Refer to ordering matrix for details |
Pharmaceuticals RTD's
| General: 100 ohm, 3-wire* sensors which conform to DIN
standards. Single element standard; dual element optional Coefficient: .00385 ohms/ohm/Deg. C Accuracy: Conforms to ASTM E1137-B and IEC-751B; 0.10% (0.26°C) at ice point 0.18% (0.66°C) at 100°C 0.21% (1.0°C) at 180°C Probe Diameters: 1/4" standard for sanitary clamp styles (1"-4") single or dual element. 5/32" standard for direct mount, clamp styles (1/2" - 3/4") clamp and "mini wells" single element only for mini styles Other diameters available for thermowell installation |
Response: 2.5 to 3 seconds for 63% step change Span: 400°F (221°C) maximum Low End: -50°F (-45°C) minimum High End: 350°F (180°C) maximum Material: 316 "L" Stainless Steel wettable parts Surface Finish: 8 micro-inch Ra electropolished 32 micro-inch Ra (thermowell fittings) Fitting Styles: All standard sanitary clamp styles, including fractional clamps and mini thermowell styles; Refer to ordering matrix for details Standards: Designed and manufactured to sound engineering practices in accordance with Article 3.3 of the PED 97/23/EC. CSA B51-03 CRN# CSA0F9754.5C |